OEM Solutions

Masimo's breakthrough noninvasive monitoring technologies can be easily integrated into a wide range of multiparameter and multi-use monitoring devices with our family of MX and MS 2000 series circuit boards.

MX boards—when used with Masimo Rainbow multiple wavelength (7+) LED sensors—are capable of providing the full suite of Masimo Rainbow SET measurements, including Total Hemoglobin (SpHb), Oxygen Content (SpOC), Carboxyhemoglobin (SpCO), Methemoglobin (SpMet) and PVI in addition to the Masimo SET measure-through motion and low perfusion pulse oximetry measurements of SpO2, pulse rate and perfusion index.

MS 2000 series boards—when used with any one of a broad array of Masimo SET compatible sensors—provide Masimo SET measure-through motion and low perfusion pulse oximetry measurements of SpO2, pulse rate and perfusion index in addition to PVI.

The new MS-2040 board utilizes about a third of the power and is only half the physical board size of previously available Signal Extraction Pulse Oximetry solutions while providing the same proven unprecedented Measure-through Motion and Low Perfusion capabilities. The MS-2040 board is also available as an external “board-in-cable” solution embedded within a completely self-contained patient cable that provides external Masimo SET pulse oximetry capabilities for existing devices that do not presently offer an integrated pulse oximetry solution.

MS-2040 Masimo SET OEM Board
First Sub-45 mW Signal Extraction Pulse Oximetry Platform

Dimensions and specifications on the MS-2040 board are as follows:

Top view

Masimo MS-2040 board front view

Double-stack version

Masimo MS-2040 double stack version

Double-stack version

  • Size = 1.8 inches by 1.15 inches
  • Board thickness = 0.46 inches
  • Mounting hole diameter = 0.110 inches

Single-stack version

  • Size = 2 inches by 1.38 inches
  • Board thickness = 0.36 inches
  • Mounting hole diameter = 0.125 inches

MX-3 Masimo Rainbow SET OEM Board

Masimo MX-3 board

Dimensions and specifications on the MX-3 board are as follows:

  • Size = 2 inches by 2.5 inches
  • Board thickness = 0.062 inches
  • Mounting hole diameter = 0.125 inches

MS-2013 Masimo SET OEM Board

Masimo MS-2013 board

Dimensions and specifications on the MS-2013 board are as follows:

  • Size = 2 inches by 2.5 inches
  • Board thickness = 0.062 inches
  • Mounting hole diameter = 0.125 inches

MS-2011 Masimo SET OEM Board

Masimo MS-2011 board

Dimensions and specifications on the MS-2011 board are as follows:

  • Size = 2 inches by 3.5 inches
  • Board thickness = 0.062 inches
  • Mounting hole diameter = 0.125 inches